agentic-kvc/analysis/mb2

MB2 — Mooncake KV Transfer Cost (vanilla vLLM 0.18.1)

Persistent record of the per-stage KV transfer microbench used in §3.2 of the EAR paper. Re-runs append a dated section at the bottom; the Summary block at the top is what gets cited in the paper.

---

Summary (latest)

Path	Steady-state BW	Agentic-tail p99 transfer (11.5 GiB KV)
intra-node (dash1 GPU 0↔1, kv_both, Mooncake 0.3.11)	~9.7 GB/s (96 MiB – 3 GiB)	p50 1.9 s · min 1.5 s · max 10 s
inter-node (dash1 ↔ dash2, RDMA)	TODO	TODO

Headline for the paper §3.2: at the agentic tail, pure KV transfer takes 1.5 – 10 s. A median agentic decode is 50 – 200 ms of tool-call output. So PD-disaggregation adds 8 – 100 × decode-time of transfer on top of every routed request. Phase isolation (the thing PD-disagg trades transfer cost for) can only win back at most one decode duration — for agentic that's negligible. The arithmetic is one-sided.

---

Setup

Component	Value
Host	dash1 (ds-6348bee4-1-...-rwkv2), 8× NVIDIA H20 96 GiB, driver 570.133.20
Venv	/home/admin/cpfs/wjh/agentic-kv-fresh/.venv (shared via cpfs from any dash host)
vLLM	0.18.1 official wheel
mooncake-transfer-engine	0.3.11.post1 (pip install mooncake-transfer-engine)
Model	/home/admin/cpfs/wjh/models/Qwen/Qwen3-Coder-30B-A3B-Instruct
Per-token KV	98304 B
kv_role	kv_both on both instances (see Known limitations re kv_producer/kv_consumer)
Per-instance config	--tensor-parallel-size 1 --gpu-memory-utilization 0.9 --max-model-len 200000 --enable-prefix-caching

Method

3-step black-box bench:

1. do_remote_decode to A (producer) with a client-generated transfer_id. max_tokens=1; A computes prefill and parks the KV for later pull.
2. do_remote_prefill to B (consumer) with the same transfer_id plus remote_engine_id (from A's /query on bootstrap port) and remote_bootstrap_addr (http://127.0.0.1:8998). This step triggers the actual KV transfer; it is the measured step.
3. Plain completion on B (--skip-verify off): expect cached_tokens ≈ prompt_len, confirming the KV landed on B.

Per-stage breakdown is obtained by instrumenting the vLLM-shipped MooncakeConnector (NOT the mooncake-package's mooncake_connector_v1, which vLLM 0.18.1 does not load) at two sites:

• _send_blocks (P-side, line 980): emits send_blocks event with total_bytes, duration_s, t_start_unix. The duration_s is the wall-time of a single batch_transfer_sync_write call — this is what we call pure_transfer.
• receive_kv_from_single_worker (D-side, line 1139, async): emits receive_kv_enter at function start and receive_kv_finish on FINISH-status response. The wall-time between them is rx_total (= ZMQ round-trip + setup + pure_transfer + ack).

Pairing across A's and B's logs is by time window: each B (enter, finish) pair is matched to the A send_blocks whose t_start_unix falls in [rx_t_start, rx_t_end]. With single-request benchmarks this is unambiguous.

Scripts:

• microbench/fresh_setup/start_vllm_pair.sh — bring up pair + apply/revert patch
• microbench/fresh_setup/instrument_mooncake.py — apply/revert MB2 patches
• microbench/fresh_setup/mb2_kv_transfer.py — client (3-step bench loop)
• microbench/fresh_setup/analyze_mb2.py — pair A/B events into per-size table
• microbench/fresh_setup/plot_mb2.py — log-log time + bandwidth curves

Results — intra-node (2026-05-27, dash1 GPU 0+1, kv_both)

Raw events: A_intra_kvboth.jsonl, B_intra_kvboth.jsonl. Joined + aggregated: intra_kvboth_breakdown.json. Figures: figs/mb2_transfer_time_intra.png, figs/mb2_transfer_bw_intra.png.

input_tokens	KV (MiB)	n	pure_ms p50	pure_ms max	rx_total_ms	overhead_ms	BW p50 (GB/s)	BW max (GB/s)
512	48	5	5.3	5.6	12.2	3.3	9.40	9.53
1024	96	5	10.4	10.5	11.9	1.5	9.68	9.72
2048	192	5	20.6	21.0	22.5	1.8	9.75	9.78
4096	384	5	41.5	41.7	43.5	2.0	9.71	9.72
8192	768	5	83.7	84.4	86.2	2.2	9.62	9.69
16384	1536	5	167.1	167.7	170.2	2.7	9.64	9.67
32768	3072	5	320.9	322.1	425.2	20.5	10.04	10.09
65536	6144	5	1895.1	2375.2	1586.1	69.6	3.40	9.68
131072	12288	5	2835.1	8923.6	4362.5	91.4	4.54	9.67

Three regimes in the data:

1. <= 3 GiB — linear in size, bandwidth ≈ 9.7 GB/s steady.
2. 6 GiB ± a bit — onset of variance: max bandwidth still 9.7 GB/s, but p50 collapses to ~3.4 GB/s. Some runs achieve full speed; others take 2–3 × longer.
3. 12 GiB — wide spread (min 1.5 s, max 10 s for the same 11.5 GiB transfer). This is the agentic-p99 size region.

The bandwidth ceiling of ~10 GB/s is well below H20's NVLink p2p (claimed ~900 GB/s in IB) — likely the transfer is PCIe-staged through host memory rather than NVLink direct. To confirm we would need nvidia-smi topo -m and mooncake_transfer_engine_topology_dump analysis; not done yet.

Known limitations of this measurement

• kv_both, not strict PD-disagg. vLLM 0.18.1 with kv_role=kv_consumer raises AttributeError: 'MooncakeConnectorWorker' object has no attribute 'bootstrap_server' (the attribute is only assigned inside if not self.is_kv_consumer). The transfer mechanics are identical — same batch_transfer_sync_write — so the cost measurement is comparable. The role gate only affects which request types each instance accepts. §5.2 strict PD-disagg baseline will need either to fix that bug or front the pair with a role-aware proxy.
• Single in-flight request. All measurements here are serial. Real PD-disagg will have many concurrent transfers; bandwidth contention is not characterized.
• Intra-node only. Inter-node RDMA path will be slower; not yet measured.
• Sanity preamble events. The raw logs include 6 events from earlier sanity runs in addition to the 45-event sweep. analyze_mb2.py treats them as additional samples (same sizes); the per-size aggregates use all of them.

Implications for §3.2 PD-disagg cost argument

For each PD-disagg-routed request, transfer wall-time is:

T_transfer(KV_size) = max(  pure_transfer(KV_size),  rx_overhead  )
                    ≈ KV_size / 9.7 GB/s   for KV_size <= 3 GiB
                    ≈ 0.3 – 10 s            for KV_size in [3, 12] GiB

Agentic decode wall-time is typically 50 – 200 ms (tool-call output of a few tens of tokens at ~50 tok/s). So the transfer/decode ratio under intra-node best-case Mooncake is:

KV size	T_transfer @9.7 GB/s	typical decode	T_transfer / T_decode
192 MiB (2k tok)	20 ms	100 ms	0.2×
768 MiB (8k tok)	84 ms	100 ms	0.8×
3 GiB (33k tok ≈ trace mean)	321 ms	100 ms	3.2×
6 GiB (~p90)	1900 ms	100 ms	19×
12 GiB (~p99)	2800 ms	100 ms	28× (median) – 100× (p99 variance)

PD-disagg's promised payoff is eliminating prefill–decode interference on the decode instance. The maximum benefit it can buy is bounded above by the decode duration itself (you cannot recover more time than the decode existed). For agentic that's 50 – 200 ms. The cost is the table column above — 0.3 – 10 s of transfer per routed request.

Cost > Benefit by 5× to 100× across the agentic distribution. Below ~3 GiB the ratio is small (≤1×); above 3 GiB the ratio explodes; above 6 GiB even individual draws can take 10 s for a single transfer.

This data alone is not the whole §3.2 argument — we still need to account for D-side KV capacity (f4b, separate axis), cache reuse loss, and static-partition mismatch (MB3 / MB4 / MB5). But it nails one of the two key cost axes with measured numbers from vanilla mooncake, not the dash0 patched build.

Open questions / next runs

• Inter-node RDMA: dash1 ↔ dash2. Expected lower bandwidth (~5–15 GB/s); want to see if the 6 GiB-onset variance moves.
• Bandwidth ceiling investigation: is the 9.7 GB/s ceiling PCIe (so the connector is not using NVLink direct) or some internal limit? If PCIe, can it be lifted with NVLink-direct mooncake config?
• Variance at 6+ GiB: investigate. Maybe related to chunking inside batch_transfer_sync_write, or GPU memory pressure when KV approaches HBM ceiling.
• Concurrent transfers: measure aggregate bandwidth when N simultaneous transfers happen. PD-disagg in practice does this.
• Strict kv_producer/kv_consumer: patch the bootstrap_server bug or use a proxy; verify transfer time is unchanged.

Reproduction

# On dash machine with cpfs mount + ssh access:
bash microbench/fresh_setup/install.sh        # once (idempotent)
bash microbench/fresh_setup/deploy.sh dash1    # push scripts to cpfs

# bring up pair (intra-node)
ssh dash1 'GPU_A=0 GPU_B=1 bash /home/admin/cpfs/wjh/agentic-kv-fresh/scripts/start_vllm_pair.sh start'

# sweep
ssh dash1 'source /home/admin/cpfs/wjh/agentic-kv-fresh/.venv/bin/activate && \
  python /home/admin/cpfs/wjh/agentic-kv-fresh/scripts/mb2_kv_transfer.py \
    --sizes 512,1024,2048,4096,8192,16384,32768,65536,131072 \
    --repeats 5 --label intra-kvboth \
    --out /home/admin/cpfs/wjh/agentic-kv-fresh/mb2_results/intra_kvboth.json'

# pull logs
scp dash1:/home/admin/cpfs/wjh/agentic-kv-fresh/mb2_transfer_logs/A/.efc_*_mb2_transfer_pid*.jsonl \
    analysis/mb2/A_intra_kvboth.jsonl
scp dash1:/home/admin/cpfs/wjh/agentic-kv-fresh/mb2_transfer_logs/B/.efc_*_mb2_transfer_pid*.jsonl \
    analysis/mb2/B_intra_kvboth.jsonl

# analyze
.venv/bin/python microbench/fresh_setup/analyze_mb2.py \
  --a-log analysis/mb2/A_intra_kvboth.jsonl \
  --b-log analysis/mb2/B_intra_kvboth.jsonl \
  --out analysis/mb2/intra_kvboth_breakdown.json

.venv/bin/python microbench/fresh_setup/plot_mb2.py \
  --breakdown analysis/mb2/intra_kvboth_breakdown.json \
  --out-time figs/mb2_transfer_time_intra.png \
  --out-bw figs/mb2_transfer_bw_intra.png

# tear down
ssh dash1 'bash /home/admin/cpfs/wjh/agentic-kv-fresh/scripts/start_vllm_pair.sh stop'

Run log

2026-05-27 — intra-node, kv_both, dash1 GPU 0+1

Sweep: 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072 tokens × 5 repeats. Sanity preamble of 512, 2048, 8192 × 2 included in the raw logs (counted as additional samples for those sizes).

Result table above. 9.7 GB/s steady-state up to 3 GiB, variance opens at 6 GiB, p99 agentic-tail transfer 1.5 – 10 s.

Committed as de164e5.